How to check and maintain the rubber vulcanizing press?

The rubber vulcanizing press has the advantages of high pressure per unit area of the hot plate, reliable operation of the equipment, and less maintenance. During use and after use, the rubber vulcanizing press should be maintained and maintained like other tools to extend its service life. Next, I will introduce the maintenance of the rubber vulcanizing press.

Here is the content list:

●What aspects of the rubber vulcanizing press should be checked daily?

●How to maintain the rubber vulcanizing press?

What aspects of the rubber vulcanizing press should be checked daily?

1. Check whether the pressure bag is damaged. Any rubbing, cutting, folding and other improper operations will cause damage to the pressure bag. After the pressure bag is damaged, it may leak water, air, or be destroyed when it is under pressure. Pay special attention to the place where the pressure bag is in contact with the water nozzle or gas nozzle;

2. Check all the pressure hoses and joints of the rubber vulcanizing press for wear, leakage, or other damage. These damages may cause the hose under pressurization, and the connector failed;

3. Check all cables to see if there are punctures, wear, aging, pay special attention to those "stress concentration points", such as between the cable and the connector;

4. If necessary, check and adjust the temperature controller. Check all indicator lights of the rubber vulcanizing press and replace them if they are damaged;

5. If the rubber vulcanizing press is equipped with a hydraulic pump, check the storage tank, pump body, and all connections for leaks. The net on the filter should be removed and cleaned. Check the pressure gauge to ensure its accuracy. Lubricate the pump body.

How to maintain the rubber vulcanizing press?

1. The rubber vulcanizing machine should be placed in a dry and well-ventilated environment to prevent the circuit from getting damp and damp;

2. Do not use the rubber vulcanizing machine outdoors on rainy days to prevent water from entering the electric control box and heating plate;

3. If the working environment is humid, When there is a lot of water, use objects on the ground to lift the rubber vulcanizing press and then disassemble it for transportation. Do not allow the rubber vulcanizing press to directly contact water;

4. If water enters the heating plate due to improper operation during use, it should be Contact the manufacturer for the first repair. If the rubber vulcanizing press needs emergency repair, you can open the heating plate cover, pour out the water first, then set the electric control box to manual operation, heat to 100℃, keep the temperature for half an hour, dry the line, and then glue the belt in the manual state;

5. When the rubber vulcanizing press is not used for a long time, the heating plate should be heated once every half month (the temperature is set to 100℃), and keep it warm for about half an hour;

6. After each use, the water in the water pressure plate should be drained. Especially in winter, if the water cannot be cleaned, it will often cause the rubber of the hydraulic pressure plate to age too quickly and reduce the service life of the hydraulic pressure plate.

Qingdao Huicai Machine Manufacture Co., Ltd has become a professional rubber machinery manufacturer and exporter in China and has produced many rubber vulcanizing presses, which have been tested before the factory to ensure quality. If you are in a related industry, you may want to consider using our products.