Publish Time: 2022-04-14 Origin: Site
Compared with other machines, the applicable rubber kneader is difficult to replace, and how much benefit can be produced when the feeding is carried out? Read on!
Here is the table of contents.
What are the characteristics of the role of rubber kneader?
What is the rubber kneader feeding process like?
For some higher viscosity, poor liquidity of the slurry, such as dough and honey, as well as plastic solids and other materials can not be processed with the general mixer and mixer, the rubber kneader processing effect is better. In the role of the internal mixer, the rubber kneader is generally first partial mixing of materials and then make the overall mixture, with the role of kneading, blending, and blending. The rubber kneader must give the material a certain squeezing pressure, shear force, folding force, and other effects, to make the material mixed uniformly, therefore, the rubber kneader blade is extra strong, must be able to withstand the huge force, the container shell also has sufficient strength and rigidity.
The hopper truck is lowered to the ground with the lifting platform, positioned with the pin, open the door, and the powder is quickly thrown into the hopper truck hopper, then quickly close the hopper truck door to prevent the powder from leaking. Close the door of the lifting platform and start the power supply, the lifting platform rises to the level of the fixed platform. The material hopper car is pushed along the rail to the side of the feeding port. Then you need uncover the feeding port cover. The material hopper car is positioned with the pin, press down the manipulation handle. The material port joint at the lower end of the hopper car is docked with the feeding port on the platform, turn the crank, the hopper plug is raised, the powder is along with the material port joint, the cloth tube, the equipment material port into the rubber kneader after the feeding is completed. Finally, the manipulation handle spring returns, pull up the positioning pin of the hopper car, push the hopper car away and cover the cover. After the feeding process, the rubber kneader can be used to mix and knead the powder. Our original feeding process is the manpower to carry the powder on the rubber kneader, into the equipment inlet, the workshop dust is very large. Now, the whole process of transporting, carrying mud, and throwing out mud is a one-step process, from the operator, the dust hazard is relatively less, the operation is also simpler and cleaner; in terms of safety, the whole process also avoids the opportunity of direct contact between personnel and the rubber kneader, better safety; from the mud transport, there is no redundant process, the dust can be controlled in the hopper car, to avoid the pollution of powder.
After years of continuous development, Qingdao Huicai Machine Manufacture Co., Ltd now has a group of experienced talents in R&D, design, production, sales, installation, and after-sales service. It has laid a solid foundation for the company to produce high-quality rubber kneadersand sustainable development.